Quick Assembly Connector

The NWC Quick Assembly SC connector can provide a quick and easy termination of fibers in the field and options are available for 900 micron allowing the installer to terminate and make connection in minutes at equipment and fiber patch panels. This connector system removes any requirement for epoxy, adhesives or costly curing ovens.

Fearture

• - Factory-installed fiber stub
• - No epoxy or polishing required
• - Allows up to three re-termination result
• - Quick and easy fiber termination in the field
• - Eliminates cable excess length and pigtail splice storage
• - Cost effective

Applications

• - Patch panels
• - Distribution frames
• - Maintenance or emergency restoration of fiber networks
• - FTTH Outlets
• - Connection at the desk for LAN environments

Specifications

Quick Assembly Connector Spec

Characteristics	Values
Fiber Type	SM(9/125), MM(50/125,62.5/125)
Fiber cable Type	900um buffered fiber, 3mm Drop Cable
Insertion loss	Max. < 0.5dB, Ave < 0.3dB
Return loss	Min . 40dB (PC)

Performance Requirements

Quick Assembly Connector Spec

Item		Condition	Failure criteria to be checked	Average	Max
Product Performance	Insertion Loss(IL)	Concatenation Method	Insertion Loss(IL)	< 0.3dB	< 0.5dB
	Return Loss(RL)	㎛	Coupler with power source and meter	Return Loss(RL)	< 40dB
Mechanical Tests	Vibration	3 axes 2hr/axis, 1.52mm(peak-peak), 10 to 55Hz(45Hz/min)	Changed in IL before and after test	< 0.2dB	< 0.5dB
	Pull	3N Load, 60sec	Changed in IL before and after test	< 0.2dB	< 0.5dB
	Impact	1 impact from 4meter(height)	Changed in IL before and after test	< 0.2dB	< 0.5dB
	Durability	100 repetition of connecting/disconnecting	Changed in IL before and after test	< 0.2dB	-
Environmental Tests	Temperature cycling	Lowest temperature: (-40+/-2)℃ Highest temperature: (+75+/-2) ℃ Dwell time:1hr Transition time: 1hr Number of cycles: 21	Changed in IL during and after test	< 0.5dB	< 0.7dB
			RL during test		< 35dB
			Appearance before and after test	No defects
	Humidity Tests	4days at 40 +/-2℃ RH 90-95%	Changed in IL during and after test	< 0.5dB	< 0.6dB
			RL during test		< 40dB
			Appearance before and after test	No defects